Pingnan customized cantilever shelf manufacturer
The selection process of the rack system mainly includes: the buyer puts forward the requirements for the storage rack system, the rack supplier carries out the scheme design and selection, the discussion and optimization of the scheme, the evaluation of the rationality and optimization degree of the scheme, the quotation, Selection of suppliers - contract signing, detailed technical design of shelf system manufacturing (material preparation, processing, surface treatment, packaging, etc.) - installation and acceptance of shelf system. Installation services account for a large proportion in procurement. According to the characteristics of shelf purchase, users are advised to pay attention to the following issues: 1. Select the appropriate shelf type; Appropriate shelf forms shall be selected according to the specifications and characteristics of goods to improve the utilization rate of shelves and the efficiency of the warehouse. Users are advised to consult the shelf manufacturer when designing the warehouse system.
Pingnan customized cantilever shelf manufacturer
Under the premise of the continuous expansion of storage costs, it is an urgent problem to improve the utilization rate of warehouses. Solving this problem can not only save costs, but also greatly improve the efficiency of warehouse management. What is the general utilization rate of the warehouse? Building area: usually refers to the building area of the warehouse. The calculation method is to measure from the bottom of the external wall of the warehouse. Area length * width is added to each floor of the building. Actual area: measured from the inner wall of the warehouse. Subtract the area occupied by obstructive buildings (columns, partitions, stairs) from the area of length * width. Usage area: subtract the area occupied by main road, branch road, wall spacing and column spacing from the actual area. Usage area: the area actually occupied by goods stacking. Warehouse resource utilization index: real estate utilization rate=(warehouse building area/real estate area) × 100%； Utilization rate of warehouse area=(usable area of warehouse) warehouse/building area (warehouse) × 100% 3. Utilization rate of warehouse area=(usable area of warehouse) warehouse/usable area (warehouse) × 100% 4. Warehouse volume utilization rate=(actual inventory or volume/storage capacity or storage capacity) × 100%； The area utilization rate should generally reach 60% of the actual area of the warehouse; Warehouse utilization rate=inventory area/total area × 100%。
Pingnan customized cantilever shelf manufacturer
Design link: paying attention to design is the premise of production, and design is also one of the preconditions for installation and use. The design must be strict and reasonable, and the elements used in all aspects must be adjusted, which is related to the safe use of heavy warehouse shelves. The design of this area generally involves the following aspects: 1. Fully evaluate the strength, steel and stability requirements of the shelf itself. Design according to relevant standards. Fully consider the height and width of heavy warehouse shelves, as well as the connection and stability of warehouse buildings. Fully consider the physical and chemical characteristics of the goods stored on the shelves of the warehouse. Manufacturing stage: the production process involves shelf quality, user experience and product brand influence. These are all important factors affecting the safety of shelves.
Pingnan customized cantilever shelf manufacturer
Heavy duty shelf is a common form of shelf in modern enterprise warehouse. The column plate+beam type fully assembled structure is simple and effective. Functional accessories such as partition, steel plate (steel grid), steel mesh layer, storage cage guide rail, oil drum rack, etc. can be installed according to the characteristics of storage unit container equipment to meet the requirements of cargo storage of different unit container equipment forms. It has good picking efficiency. Prevent jacking. Put the light on the top and the heavy on the bottom. Overload is strictly prohibited, and the stacking weight of each layer of heavy shelves shall not exceed the bearing capacity. During the operation of the forklift, be careful when picking up the goods to prevent unnecessary damage caused by collision with the shelves. When goods are placed on the shelf, they shall not enter the bottom of the shelf directly to avoid safety accidents. Heavy shelves are composed of columns, beams, cross braces, diagonal braces and self-locking bolts, which can effectively prevent the shelves from losing stability after the bolts are loosened. It is widely used in logistics, warehousing and other fields. It is suitable for manual storage of box goods, or loading scattered heavy objects in combination with spare parts boxes and turnover boxes. The standard payload of each layer exceeds 800 kg.
Pingnan customized cantilever shelf manufacturer
With the development of economy, proper shelves can greatly improve the transportation speed and reduce the complicated intermediate links. Warehouse shelves focus on making shelves. Heavy duty shelves are very popular in the market at present. The utility model has strong bearing capacity, convenient disassembly and assembly, and convenient structure, which is suitable for various warehouses and can store a variety of products. Therefore, many companies are very satisfied with this kind of shelf. When designing heavy shelves, just leave enough passages according to the size of the forklift. When storing goods, the warehouse can realize the cooperation between manpower and forklift, which greatly improves the inventory efficiency of employees. Heavy duty rack is the general name of the rack types with strong bearing capacity. Heavy duty shelves generally have a span of less than 4 meters and a depth of 1.5 meters. The low-end or high-end shelves are within 12 meters, and the high-end or high-end shelves are within 30 meters (most of these shelves are automated warehouses, and the total height of the system consists of several columns within 12 meters).
