Kunming customized pallet shelf manufacturer
1. The shelf installation shall be constructed according to the drawings. In case of any inconsistency in site or design during construction, it shall be put forward in time and construction can be carried out only after approval. 2. Various measuring and testing instruments, meters and equipment used for shelf installation shall comply with the provisions of current measuring laws and regulations, and their accuracy shall not be lower than the installation requirements. 3. The general installation and acceptance of shelves shall ensure quality and safety, promote technical progress, and improve economic benefits. This specification is formulated. The space for storing goods is called storage space. On the surface, it is used for storage, but actually this space is a transit station for purchasing, selling and distributing goods. Therefore, the storage area has become the central hub of goods storage and transportation. Therefore, the effective use of storage space has become an important issue for managers and logistics centers to improve. This puts forward higher requirements for the customization of heavy shelves. The emergence of modern warehouses has promoted the development of shelves.
Kunming customized pallet shelf manufacturer
2. Heavy shelves above 1 ton in the industry; Although it has been seen on many networks, theoretically, as long as the load capacity exceeds 500kg, it is considered as a heavy rack. In fact, in the shelf industry, heavy shelves with a load capacity of 1 ton or more are called heavy shelves, and 1 ton (t)=1000 kg (kg). 3. Keep the safety factor; This does not mean that the carrying capacity of heavy shelves is 1 ton. It is completely based on the load limit of one ton. This is not correct, because for safety reasons, it is necessary to leave a safety factor, which is usually 1.65. That is to say, if the carrying capacity of a heavy shelf is 1 ton, it must be able to withstand 1.65 tons without irreversible deformation.
Kunming customized pallet shelf manufacturer
When purchasing shelves, you must choose the shelves that are suitable for your own warehouse characteristics, so before purchasing, you must plan by yourself, or let the professional technicians of the shelf factory customize them for you, so that the utilization rate of your warehouse will be greatly improved. This growth will also reduce the possibility of problems in the future to low z. The process of purchasing shelves. The black part of the shelf should go through degreasing, rust removal, pretreatment, phosphating, passivation, electrostatic spraying, high-temperature curing and other links. The quality of the powder is also divided into good and bad. Generally speaking, each shelf company has standard colors, and the cost of spraying standard colors is generally low. If special colors are used, powder replacement will increase the construction period and waste powder, so the cost is relatively high. There are three kinds of shelves commonly used in supermarkets, one is single-sided back net, one is double-sided back net, and the other is angle steel shelves. Others like shelves and floats are also useful. The specific model rules are based on the graphic design and product placement of the supermarket.
Kunming customized pallet shelf manufacturer
Generally speaking, the current methods to improve the utilization rate of warehouse space mainly include warehouse planning, the use of three-dimensional space, the use of standard packaging, etc. Analysis of warehouse planning elements In order to greatly improve the utilization rate of warehouse space, scientific and reasonable warehouse planning is an indispensable important link, and also an important means to realize the maximization of space utilization. Warehouse planning mainly includes regional layout planning, material level setting planning, material stacking method planning, and material identification planning. The use of three-dimensional space The three-dimensional warehouse can make full use of the vertical space of the warehouse, so that the storage capacity per unit area is far greater than that of the ordinary single-layer warehouse, which is generally 4 to 7 times that of the single-layer warehouse. At present, the z high three-dimensional warehouse in the world can reach more than 50 meters, and can accommodate tens of thousands or even more than 100000 cargo spaces. Generally speaking, there are automatic loading and unloading equipment matching with the stereoscopic warehouse, as shown in Figure 5-6, which is the representative of the stereoscopic warehouse. Use standard packaging. Each storage location has a fixed size, so that standard packaging containers can be used. Standard packaging is very convenient for labeling, maintenance, inspection and transportation of goods. The stored materials are marked on the top of each container. Combined with barcode technology, it realizes the automatic management of warehousing materials and inventory, bringing great convenience to work.
