Fujian customized through shelf manufacturer
Avoid heavy objects and portability: shelves should follow the standard of light floor, that is, heavy objects on the lower floor and earlier products. Do not use non-standard pallets on shelves. When the goods are placed on the shelf of the warehouse, the actual operator should not enter the shelf of the warehouse immediately. In shelf layout design, some people tend to pay attention to the large number of shelves (the more shelves, the higher the utilization rate of the warehouse), but often ignore the feasibility and convenience of the actual work. Therefore, these drawings are not standard. For example, you can place shelves on one side of a wall. If a double drain pipe is placed on the wall, the internal shelf will not be suitable for the product and will be difficult to remove. If you put a row of shelves instead of a wall, you will waste too much space. Because each row of shelves should have a certain distance. The total distance shall be controlled within 1m and the distance shall be controlled within 0.8m. The solution to unqualified design drawings is to carefully consider the inconvenience after drawings and the past distance. There is no pillar in the middle, and the door of the warehouse is not easy to close or open. Whether the fire safety requirements are met.
Fujian customized through shelf manufacturer
2. Pay attention to the shelf construction period; Most racks are customized. Customers need to reserve time for design, production, transportation and installation when purchasing. To determine these times, it is recommended that the customer communicate with the rack manufacturer in advance, and then make reasonable arrangements according to the time needed. 3. Pay attention to the condition on the shelf; At present, many projects need to install shelves when the civil works are still under construction. In fact, shelf installation is required when installation conditions are not available, which often results in uncontrollable shelf construction period and poor shelf construction quality. After all, the next process of shelf products is on-site construction, and a good construction environment is an important guarantee for product quality and construction period.
Fujian customized through shelf manufacturer
High shelf column specification: 90 × sixty-five × 1.8 mm, 70 mm × sixty × 1.8 mm, 55 × forty-five × 1.5mm and other special shelf column profiles. The front beam of high-rise shelf is generally C-shaped steel welded beam with width of 90-140mm, height of 50mm and material thickness of 1.5mm. Shuttle rack. Shuttle rack system is a high-density storage system composed of shelves, trolleys and forklifts. This efficient warehousing method is to improve the utilization rate of warehouse space and bring new warehousing options to customers! Shuttle shelf has the advantages of high storage density and high warehouse utilization. It is also highly efficient and greatly reduces the waiting time for operation. This kind of rack is flexible in operation, and the way of storing goods can be first in first out or first in last out. The safety factor is high, which reduces the collision between the shelf and the forklift, and improves the safety and productivity. The lighting requirements are relatively low, and the overall investment is less compared with other types of shelves.
Fujian customized through shelf manufacturer
With the development of economy, proper shelves can greatly improve the transportation speed and reduce the complicated intermediate links. Warehouse shelves focus on making shelves. Heavy duty shelves are very popular in the market at present. The utility model has strong bearing capacity, convenient disassembly and assembly, and convenient structure, which is suitable for various warehouses and can store a variety of products. Therefore, many companies are very satisfied with this kind of shelf. When designing heavy shelves, just leave enough passages according to the size of the forklift. When storing goods, the warehouse can realize the cooperation between manpower and forklift, which greatly improves the inventory efficiency of employees. Heavy duty rack is the general name of the rack types with strong bearing capacity. Heavy duty shelves generally have a span of less than 4 meters and a depth of 1.5 meters. The low-end or high-end shelves are within 12 meters, and the high-end or high-end shelves are within 30 meters (most of these shelves are automated warehouses, and the total height of the system consists of several columns within 12 meters).
Fujian customized through shelf manufacturer
Fifth, cold chain logistics realizes closed operation; Manufacturers, cold chain logistics companies and government regulators need to be tied together to implement closed operations; Enterprises that need to participate in cold chain logistics operations need to establish unified norms and standards, and establish a dynamic quality tracking and monitoring system based on logistics information technology. Improve the cold chain quality information release and accountability system. Sixth, learn from advanced cold chain technology in developed countries; Learn from the experience of developed countries, establish an integrated cold chain logistics model that can meet the needs of consumers, suppliers and retailers, apply multi temperature layer technology in the transportation process, and store products and shelves through computer systems. Enter the quantity and storage location of frozen and refrigerated products to improve operation efficiency and management level.
Fujian customized through shelf manufacturer
Generally speaking, the current methods to improve the utilization rate of warehouse space mainly include warehouse planning, the use of three-dimensional space, the use of standard packaging, etc. Analysis of warehouse planning elements In order to greatly improve the utilization rate of warehouse space, scientific and reasonable warehouse planning is an indispensable important link, and also an important means to realize the maximization of space utilization. Warehouse planning mainly includes regional layout planning, material level setting planning, material stacking method planning, and material identification planning. The use of three-dimensional space The three-dimensional warehouse can make full use of the vertical space of the warehouse, so that the storage capacity per unit area is far greater than that of the ordinary single-layer warehouse, which is generally 4 to 7 times that of the single-layer warehouse. At present, the z high three-dimensional warehouse in the world can reach more than 50 meters, and can accommodate tens of thousands or even more than 100000 cargo spaces. Generally speaking, there are automatic loading and unloading equipment matching with the stereoscopic warehouse, as shown in Figure 5-6, which is the representative of the stereoscopic warehouse. Use standard packaging. Each storage location has a fixed size, so that standard packaging containers can be used. Standard packaging is very convenient for labeling, maintenance, inspection and transportation of goods. The stored materials are marked on the top of each container. Combined with barcode technology, it realizes the automatic management of warehousing materials and inventory, bringing great convenience to work.
