Hechi customized shelf manufacturer
Provisions on the natural environment of the storage rack: the storage rack shall be in a natural, ventilated and dry environment, so as to properly handle the area where the paint does not rust and fall off. Ground shelf requirements: ground shelf requirements are very important. If the storage rack is supported on the ground as a whole, the electric forklift will remain consistent even in the whole state. The shelf remains stationary, so there is no danger of collapse. Overload protection: the net weight of goods stored on each floor shall not exceed the larger bearing capacity of the warehouse shelf design concept. Super elevation prevention: limit the height and width of the shelves, and the specifications of the pallets and goods should be slightly lower than the internal net space. Avoid collision: electric forklifts should be very careful in the whole process.
Hechi customized shelf manufacturer
High shelf column specification: 90 × sixty-five × 1.8 mm, 70 mm × sixty × 1.8 mm, 55 × forty-five × 1.5mm and other special shelf column profiles. The front beam of high-rise shelf is generally C-shaped steel welded beam with width of 90-140mm, height of 50mm and material thickness of 1.5mm. Shuttle rack. Shuttle rack system is a high-density storage system composed of shelves, trolleys and forklifts. This efficient warehousing method is to improve the utilization rate of warehouse space and bring new warehousing options to customers! Shuttle shelf has the advantages of high storage density and high warehouse utilization. It is also highly efficient and greatly reduces the waiting time for operation. This kind of rack is flexible in operation, and the way of storing goods can be first in first out or first in last out. The safety factor is high, which reduces the collision between the shelf and the forklift, and improves the safety and productivity. The lighting requirements are relatively low, and the overall investment is less compared with other types of shelves.
Hechi customized shelf manufacturer
Fifth, cold chain logistics realizes closed operation; Manufacturers, cold chain logistics companies and government regulators need to be tied together to implement closed operations; Enterprises that need to participate in cold chain logistics operations need to establish unified norms and standards, and establish a dynamic quality tracking and monitoring system based on logistics information technology. Improve the cold chain quality information release and accountability system. Sixth, learn from advanced cold chain technology in developed countries; Learn from the experience of developed countries, establish an integrated cold chain logistics model that can meet the needs of consumers, suppliers and retailers, apply multi temperature layer technology in the transportation process, and store products and shelves through computer systems. Enter the quantity and storage location of frozen and refrigerated products to improve operation efficiency and management level.
Hechi customized shelf manufacturer
Under the premise of the continuous expansion of storage costs, it is an urgent problem to improve the utilization rate of warehouses. Solving this problem can not only save costs, but also greatly improve the efficiency of warehouse management. What is the general utilization rate of the warehouse? Building area: usually refers to the building area of the warehouse. The calculation method is to measure from the bottom of the external wall of the warehouse. Area length * width is added to each floor of the building. Actual area: measured from the inner wall of the warehouse. Subtract the area occupied by obstructive buildings (columns, partitions, stairs) from the area of length * width. Usage area: subtract the area occupied by main road, branch road, wall spacing and column spacing from the actual area. Usage area: the area actually occupied by goods stacking. Warehouse resource utilization index: real estate utilization rate=(warehouse building area/real estate area) × 100%； Utilization rate of warehouse area=(usable area of warehouse) warehouse/building area (warehouse) × 100% 3. Utilization rate of warehouse area=(usable area of warehouse) warehouse/usable area (warehouse) × 100% 4. Warehouse volume utilization rate=(actual inventory or volume/storage capacity or storage capacity) × 100%； The area utilization rate should generally reach 60% of the actual area of the warehouse; Warehouse utilization rate=inventory area/total area × 100%。
Hechi customized shelf manufacturer
Impact of preliminary design. Design is the premise of production, installation and use. The design is rigorous and reasonable, can coordinate all aspects of the use of factors, related to the safe use of shelves. The design in this respect generally refers to the following aspects: (1) comprehensively evaluate the strength, stiffness and stability requirements of the shelf itself. Design according to relevant standards; (2) Fully consider the height and width of shelves and the connection and stability of warehouse buildings; (3) Fully consider the impact of physical and chemical properties of goods stored on the shelf. Safety factors during shelf manufacturing. The manufacturing stage is related to the quality of shelves, user experience and brand influence of products, and is one of the important factors related to shelf safety. The details are as follows: (1) If the material specifications do not conform to the design, the structural performance will be weakened, resulting in potential safety hazards; (2) If the rack painting process is not sufficiently treated, the paint peels off, affecting the internal structure; (3) The accuracy and details of shelf manufacturing are not in place, resulting in a lack of tight connection between each group of shelves and other shelves, which is prone to safety problems.
