Shelf price of production warehouse in the whole state
Provisions on the natural environment of the storage rack: the storage rack shall be in a natural, ventilated and dry environment, so as to properly handle the area where the paint does not rust and fall off. Ground shelf requirements: ground shelf requirements are very important. If the storage rack is supported on the ground as a whole, the electric forklift will remain consistent even in the whole state. The shelf remains stationary, so there is no danger of collapse. Overload protection: the net weight of goods stored on each floor shall not exceed the larger bearing capacity of the warehouse shelf design concept. Super elevation prevention: limit the height and width of the shelves, and the specifications of the pallets and goods should be slightly lower than the internal net space. Avoid collision: electric forklifts should be very careful in the whole process.
Shelf price of production warehouse in the whole state
Heavy shelves are made of high-quality cold-rolled steel, and the surface is sprayed with anti-static powder. Equipped with safety pins and fixing screws to ensure safety and stability. It can make full use of the warehouse space, improve the utilization rate of the warehouse capacity, and expand the storage capacity of the warehouse. The goods can be stored conveniently, realizing 100% picking capacity. The goods stored on the heavy shelves are clear at a glance, which is easy to count, divide, measure and other very important management tasks. It can meet the needs of a large number of goods, multiple warehousing and centralized management. With the help of mechanical handling tools, it can also achieve orderly warehousing and handling. The installation acceptance of heavy shelves shall ensure the quality and safety, and the installation shall be carried out according to the drawings. In the process of construction, if there is any discrepancy in the site or design, it shall be put forward in time, and construction can be carried out only after approval. Various measuring instruments, meters, meters and equipment used in the installation shall comply with the provisions of the current national measurement laws and regulations, and their accuracy shall not be lower than the accuracy required for installation. During the installation and construction of heavy shelves, in addition to this specification, the current national (industrial) standards and regulations shall also be complied with.
Shelf price of production warehouse in the whole state
Under the premise of the continuous expansion of storage costs, it is an urgent problem to improve the utilization rate of warehouses. Solving this problem can not only save costs, but also greatly improve the efficiency of warehouse management. What is the general utilization rate of the warehouse? Building area: usually refers to the building area of the warehouse. The calculation method is to measure from the bottom of the external wall of the warehouse. Area length * width is added to each floor of the building. Actual area: measured from the inner wall of the warehouse. Subtract the area occupied by obstructive buildings (columns, partitions, stairs) from the area of length * width. Usage area: subtract the area occupied by main road, branch road, wall spacing and column spacing from the actual area. Usage area: the area actually occupied by goods stacking. Warehouse resource utilization index: real estate utilization rate=(warehouse building area/real estate area) × 100%； Utilization rate of warehouse area=(usable area of warehouse) warehouse/building area (warehouse) × 100% 3. Utilization rate of warehouse area=(usable area of warehouse) warehouse/usable area (warehouse) × 100% 4. Warehouse volume utilization rate=(actual inventory or volume/storage capacity or storage capacity) × 100%； The area utilization rate should generally reach 60% of the actual area of the warehouse; Warehouse utilization rate=inventory area/total area × 100%。
Shelf price of production warehouse in the whole state
2. Heavy shelves above 1 ton in the industry; Although it has been seen on many networks, theoretically, as long as the load capacity exceeds 500kg, it is considered as a heavy rack. In fact, in the shelf industry, heavy shelves with a load capacity of 1 ton or more are called heavy shelves, and 1 ton (t)=1000 kg (kg). 3. Keep the safety factor; This does not mean that the carrying capacity of heavy shelves is 1 ton. It is completely based on the load limit of one ton. This is not correct, because for safety reasons, it is necessary to leave a safety factor, which is usually 1.65. That is to say, if the carrying capacity of a heavy shelf is 1 ton, it must be able to withstand 1.65 tons without irreversible deformation.
