Xiamen mold shelf manufacturer
Avoid heavy objects and portability: shelves should follow the standard of light floor, that is, heavy objects on the lower floor and earlier products. Do not use non-standard pallets on shelves. When the goods are placed on the shelf of the warehouse, the actual operator should not enter the shelf of the warehouse immediately. In shelf layout design, some people tend to pay attention to the large number of shelves (the more shelves, the higher the utilization rate of the warehouse), but often ignore the feasibility and convenience of the actual work. Therefore, these drawings are not standard. For example, you can place shelves on one side of a wall. If a double drain pipe is placed on the wall, the internal shelf will not be suitable for the product and will be difficult to remove. If you put a row of shelves instead of a wall, you will waste too much space. Because each row of shelves should have a certain distance. The total distance shall be controlled within 1m and the distance shall be controlled within 0.8m. The solution to unqualified design drawings is to carefully consider the inconvenience after drawings and the past distance. There is no pillar in the middle, and the door of the warehouse is not easy to close or open. Whether the fire safety requirements are met.
Xiamen mold shelf manufacturer
Shelf has always been one of the important basic equipment in production, logistics and trade industries. Mass customization shelves require a large amount of one-time investment, and are not easy to move after installation. This requires us to pay attention to certain matters when installing and using shelves, standardize the use of warehouse shelves, and make shelves more convenient to serve our production and life. When using shelves, the principle of lightweight and high lightweight should be generally followed. Try to place heavier items at the bottom of the shelf and lighter products at the top of the shelf. It is more conducive to balance and shelf stability. Please be careful when placing goods on the shelf, especially some large and heavy goods. Improper operation may cause collision or wear of shelves. Attention to this detail is also one of the measures to ensure your own safety. When using the storage rack, it is also necessary to prevent rain and moisture. Since the materials used to make the shelf are basically metal, the protective layer on the surface may peel off under the erosion of rain, which is prone to embroidery and other problems. Long time will affect the normal service life of the shelf. In terms of details, especially the main shelf should be placed in the warehouse to avoid rain from windows and other places.
Xiamen mold shelf manufacturer
First, strengthen the construction of logistics infrastructure; The hardware planning of the cold chain logistics system includes: plant planning, storage equipment planning, transportation equipment planning, etc. Since the cold chain logistics needs to pay attention to insulation and prevent temperature loss, some special storage equipment related to temperature is required. The construction of logistics infrastructure is the foundation of logistics supply chain. Logistics systems must deliver on time and reduce inventory costs. The truck in the transportation link, the crane in the loading and unloading link, the conveyor belt in the storage link, and the hardware facilities such as land and factory buildings are the basis to ensure the smooth operation process. Second, enhance the soft power of enterprise management; On the basis of the gradual improvement of enterprise infrastructure construction, the integration ability, management level, capital operation level and informatization construction of enterprises are the driving forces for the development of enterprise logistics. The strong integration ability and management level of enterprises have become the necessary conditions to effectively guarantee the operation of logistics supply chain. Enterprises must take various ways to build soft power of enterprise management. It is necessary to strengthen the construction of logistics supply chain management level, uniformly plan the overall service level of logistics supply chain through the upgrading of management mode, establish a flexible and efficient logistics management system, improve operation efficiency and reduce corresponding losses.
Xiamen mold shelf manufacturer
The selection process of the rack system mainly includes: the buyer puts forward the requirements for the storage rack system, the rack supplier carries out the scheme design and selection, the discussion and optimization of the scheme, the evaluation of the rationality and optimization degree of the scheme, the quotation, Selection of suppliers - contract signing, detailed technical design of shelf system manufacturing (material preparation, processing, surface treatment, packaging, etc.) - installation and acceptance of shelf system. Installation services account for a large proportion in procurement. According to the characteristics of shelf purchase, users are advised to pay attention to the following issues: 1. Select the appropriate shelf type; Appropriate shelf forms shall be selected according to the specifications and characteristics of goods to improve the utilization rate of shelves and the efficiency of the warehouse. Users are advised to consult the shelf manufacturer when designing the warehouse system.
Xiamen mold shelf manufacturer
Shelves and warehouse shelves are actually the same thing. They are roughly divided into four types: heavy frame, medium frame, light frame and angle steel frame. The specific specifications are based on the size, height, and items to be placed in the warehouse. decision. When purchasing a shelf, you need to see the stability of the shelf. It has always been one of the key problems in the steel structure design of storage racks. The wide application of the steel structure system of the shelf highlights the importance and urgency of the stability research. Because there are many uncertain factors in the design, construction and use of the storage rack steel structure system, it is necessary to introduce reliability analysis. When purchasing shelves, you must choose the shelves that are suitable for your own warehouse characteristics, so before purchasing, you must plan by yourself, or let the professional technicians of the shelf factory customize them for you, so that the utilization rate of your warehouse will be greatly improved. This growth will also reduce the possibility of problems in the future to low z.
