Zhanjiang customized storage shelf manufacturer
Avoid heavy objects and portability: shelves should follow the standard of light floor, that is, heavy objects on the lower floor and earlier products. Do not use non-standard pallets on shelves. When the goods are placed on the shelf of the warehouse, the actual operator should not enter the shelf of the warehouse immediately. In shelf layout design, some people tend to pay attention to the large number of shelves (the more shelves, the higher the utilization rate of the warehouse), but often ignore the feasibility and convenience of the actual work. Therefore, these drawings are not standard. For example, you can place shelves on one side of a wall. If a double drain pipe is placed on the wall, the internal shelf will not be suitable for the product and will be difficult to remove. If you put a row of shelves instead of a wall, you will waste too much space. Because each row of shelves should have a certain distance. The total distance shall be controlled within 1m and the distance shall be controlled within 0.8m. The solution to unqualified design drawings is to carefully consider the inconvenience after drawings and the past distance. There is no pillar in the middle, and the door of the warehouse is not easy to close or open. Whether the fire safety requirements are met.
Zhanjiang customized storage shelf manufacturer
With the development of economy, proper shelves can greatly improve the transportation speed and reduce the complicated intermediate links. Warehouse shelves focus on making shelves. Heavy duty shelves are very popular in the market at present. The utility model has strong bearing capacity, convenient disassembly and assembly, and convenient structure, which is suitable for various warehouses and can store a variety of products. Therefore, many companies are very satisfied with this kind of shelf. When designing heavy shelves, just leave enough passages according to the size of the forklift. When storing goods, the warehouse can realize the cooperation between manpower and forklift, which greatly improves the inventory efficiency of employees. Heavy duty rack is the general name of the rack types with strong bearing capacity. Heavy duty shelves generally have a span of less than 4 meters and a depth of 1.5 meters. The low-end or high-end shelves are within 12 meters, and the high-end or high-end shelves are within 30 meters (most of these shelves are automated warehouses, and the total height of the system consists of several columns within 12 meters).
Zhanjiang customized storage shelf manufacturer
2. Pay attention to the shelf construction period; Most racks are customized. Customers need to reserve time for design, production, transportation and installation when purchasing. To determine these times, it is recommended that the customer communicate with the rack manufacturer in advance, and then make reasonable arrangements according to the time needed. 3. Pay attention to the condition on the shelf; At present, many projects need to install shelves when the civil works are still under construction. In fact, shelf installation is required when installation conditions are not available, which often results in uncontrollable shelf construction period and poor shelf construction quality. After all, the next process of shelf products is on-site construction, and a good construction environment is an important guarantee for product quality and construction period.
Zhanjiang customized storage shelf manufacturer
Choose professional and honest shelf suppliers; 2. Before using the shelf, pay attention to the precautions on the shelf signboard; 3. Overload resistance: the weight of goods stored in each layer shall not exceed the designed bearing capacity of the shelf. 4. Over height and over width prevention: the height and width of the shelf are limited, and the size of the pallet and goods should be slightly less than 100mm clearance. 5. Anti collision: The forklift should be handled as gently as possible during use. 6. Anti jacking: the principle of light installation on top and heavy installation on bottom shall be followed. 7. Non standard floor (card board) shall be prevented from being used on the shelf, and the bottom shall be marked with "Chuan". 8. When goods are placed on the top of the shelf, operators should try not to enter the bottom of the shelf directly. 9. The shelf maintenance does not need high frequency maintenance, but at least once a year.
Zhanjiang customized storage shelf manufacturer
1. The shelf installation shall be constructed according to the drawings. In case of any inconsistency in site or design during construction, it shall be put forward in time and construction can be carried out only after approval. 2. Various measuring and testing instruments, meters and equipment used for shelf installation shall comply with the provisions of current measuring laws and regulations, and their accuracy shall not be lower than the installation requirements. 3. The general installation and acceptance of shelves shall ensure quality and safety, promote technical progress, and improve economic benefits. This specification is formulated. The space for storing goods is called storage space. On the surface, it is used for storage, but actually this space is a transit station for purchasing, selling and distributing goods. Therefore, the storage area has become the central hub of goods storage and transportation. Therefore, the effective use of storage space has become an important issue for managers and logistics centers to improve. This puts forward higher requirements for the customization of heavy shelves. The emergence of modern warehouses has promoted the development of shelves.
