Safety knowledge needed to use storage shelves

1. Overload prevention: the weight of goods stored in each layer shall not exceed the designed load peak of the shelf.

2. Height and width prevention: the height and width of the shelf are limited, and the size of the pallet and the goods should be slightly less than 100mm gap.

3. Anti collision: When using a forklift, try to handle it with care.

4. Prevention of top heavy and bottom heavy: the principle of light goods first and heavy goods second is followed.

5. In order to avoid the use of non-standard floors (cardboard) on the shelves, the Chuanzi bottom will be more appropriate.

6. When goods are placed above the shelf, operators should try not to directly enter the bottom of the shelf.

7. If the rack crossbeam and column are found to be seriously damaged, it is recommended to notify the manufacturer to replace them in time.

Gravity shelf is developed on the basis of continuous shelf and mobile shelf. It has the dual characteristics of two shelves, avoiding the disadvantages: first in first out, silent design, anti-collision design and export delay design, so that goods can be quickly used; It is suitable for storage with few varieties, large capacity and high time requirements, and the utilization rate of warehouse is high.

Guangxi Heavy Shelf The advantage of is that each tray can be stored or moved separately without moving other trays. It can adapt to different types of boards. The height of the crossbeam of the heavy storage rack can be adjusted according to the size requirements of the goods. Large cargo flow and fast loading and unloading speed. The supporting equipment is simple, the cost is relatively low, and it can be quickly installed and folded. Heavy storage rack can adapt to various transport machines, building structures and floors. Heavy storage racks prevent shelving. Cargo damage due to strength and stiffness. The top level of the warehouse can be used as much as possible.

Special requirements for heavy storage rack: when the height of goods exceeds 8 meters, corresponding loader is required. Due to the large channel area required, the storage density is lower than other systems.

Guangxi storage rack It is suggested that the above content is collected by the Internet and the copyright belongs to the original author. If there is any infringement, please contact us to delete the content. Thank you!